Grasp the plug (11) at the rear of the machine and pull power cable to its full extent (See warnings). DO NOT extend power cable beyond red warning line
on power cable. Insert Plug into the main power supply. Your BENNETT READ ONE is equipped with an automatic cord rewind function. After unplugging the
machine from the wall socket, give the power cable a short sharp tug and then let the automatic cord rewind slowly retract the power cable
Press power on button (1). If machine is on, the LED
light on the switch will be illuminated
11
8
YOU ARE NOW READY TO VACUUM YOUR HOME!
The pump switch must
NOT
be used in any
vacuuming mode. Use of the pump without water
will lead to
PUMP FAILURE
. Only switch the pump
on when using your BENNETT READ ONE
for deep cleaning purposes.
When cleaning delicate areas such as blinds or curtains,
the suction strength can be adjusted by sliding the suction
control valve (24) towards you to open it. This will reduce
the suction so that you can vacuum delicate surfaces or
fabrics in your home.
For precise cleaning tasks, remove floor nozzle and replace with desired
attachments (19, 20)
IMPORTANT:
NOTE:
Summary of Contents for ONE 114 R
Page 1: ...MODEL 114 R USER GUIDE COMPLETE HOME CLEANING SYSTEM ONE...
Page 2: ......
Page 6: ...4 1 2 3 4 6 5 7 9 11 10 30 23 24 25 8 33 12 29...
Page 27: ......
