TF02 Operating Manual V
1.1
Benewake (Beijing)
Co., Ltd.
Page11
Figure 4 TF host computer interface
As shown in Figure4, open the TF host computer, select I
『
Benewake TF02
』
and select the serial port
for automatic identification (here is II
『
COM9
』）
.
Then, click
『
CONNECT
』
to connect to the host computer.
After connected successfully, continuous output data images will occur in the right IV
『
TIME LINE
CHART
』
area (with the horizontal and longitudinal coordinates indicating the data size and the real-time
ranging value respectively) and the V
『
REAL TIME DATA
』
area below will display the current real-
time test distance (Dist: 125cm), the effective data size per second (Effective Points: 100).
4) Other commands
If TF02 needs to output Pixhawk format strings, check III
『
Pix Mode
』
first and then the data images
can be normally output in the IV
『
TIME LINE CHART
』
area. After the Pix Mode is checked, the distance
unit will change to m.
