manualshive.com logo in svg

BENETEAU 461, Owner'S Manual

Share
Download
BENETEAU 461 Owner'S Manual Download Page 44

 44 

197837 RCD-2

Index C

5.8   GENOA FURLER

Operation
- Leave several turns of the furling line around the drum.
- Furl/unfurl the genoa slowly so that the furling line is always under light tension, thus avoiding any riding turns in the 
drum.
- Never slacken the genoa halyard when furling/unfurling the sail.
- When furling in light winds, it is recommended that you keep the sheet under slight tension so that the genoa furls 
correctly.

- Furling and unfurling of the sail are carried out upwind.

Maintenance
- Rinse the furling drum regularly.
- It is recommended that you rinse mechanical parts at least once a year with fresh water.

5.9   SINGLE LINE FURLER

- The jib furler differs in use from roller reefing gear: The foresail is either completely furled or completely unfurled. It is 
not possible to reduce the sail plan using the jib furler as can be done with roller reefing gear.

- Furling and unfurling is carried out downwind.

Maintenance
- Rinse the drum regularly.
- It is recommended that you rinse mechanical parts at least once a year with fresh water.

Genoa furler

Traditional or furler mast

Genoa furler

Mast Performance

Refer to the manufacturer's instructions for 

use and maintenance.

Rigging and sails

Summary of Contents for 461































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands