BENETEAU 461, Owner'S Manual

Page: 227 / 254

197837 RCD-2
Index C
227
Emergency Procedure
O
PENING
PLATFORM: C
LOSURE
PLATFORM:
1. Switch the circuit breaker. 1. Push the switch upwards .
2. Remove the guard-rails from the swimming ladder. 2. Wait for the system to stop completely.
3. Push the switch downwards. 3. Replace the swimming ladder guard-rails.
4. Wait for the system to stop completely.
4. Switch off the circuit breaker of the relevant apparatus on
the electrical panel.
If the cylinder fails, you can close the platform manually by following the steps
below:
- Shut off the DC supply of the cylinder by the circuit breaker;
- Remove the split ring (item 1) and the shaft (item 2) at the two cylinder fixings;
- Remove the platform cylinder and store it in the boat;
- Strike an end on the platform to raise it manually. It is possible to use a winch
for this operation.
- When not operating:
- Make sure the breaker is turned off.
De
ck
f
it
ti
ng
s
16 16