BENETEAU 461 Owner'S Manual Download Page 141

Page: 141 / 254

197837 RCD-2
Index C

141

Manual control of the air-conditioning

1. Data display

Screen displaying desired temperature, programmed values and error messages.

2. MODE

Enables navigation between the different operating modes.

3. POWER/OFF

Lights up when the system is switched off. The manual ventilator may continue to run.

4. COOL

Indicates that the compressor is activated when cooling.

5. HEAT

Indicates that the compressor is activated when heating.

6. Option (Auxiliary heating).

7. AUTOMATIC

Comes on when the system is in AUTO mode.

8. DEHUMIDIFY

Comes on when the system is in dehumidifying mode.

9. + and - keys

Allow you to raise or lower the desired temperature.

10. Cooling indicator

This indicates that the compressor is in COOLING mode.

11. Heating indicator

This indicates that the compressor is in HEATING mode.

12. Option (Auxiliary heating).

13. Temperature control indicator

This indicates the temperature control setting (desired ambient temperature).

14. Indicator for the manual ventilator

This comes on when the manual ventilator is running.

15. Indicator for the automatic ventilator

This comes on when the ventilator is running in automatic mode.

16. Ventilator key

Allows you to select manual or automatic mode for the ventilator.

17. Ventilator speed indicator

Shows current ventilator speed.

NOTES

- When the system is in dehumidifying mode,
the system's safety devices remain active: if
there is an interruption in the flow of seawater or
a drop in AC voltage, the system automatically
stops.

- In cooling mode, the system works efficiently
when the seawater temperature is below 30°C.

- In heating mode, the system works efficiently
when the seawater temperature is above 13°C.

- It is important to switch the system to
HEATING mode at least once a month to
prevent the changeover cock from becoming
stuck in the COOLING mode.

Onbo

ard co

mfor

Summary of Contents for 461































































































































































































































































Search results

Summary of Contents for 461

Reviews:

Brands by name

Popular brands

BENETEAU 461, Owner'S Manual

Search results

Summary of Contents for 461

Reviews:

Brands by name

Popular brands