BENETEAU 461, Owner'S Manual

Page: 139 / 254

197837 RCD-2
Index C
139
DIAGRAM - AIR CONDITIONING
1. Insulated pipe
2. Ambient air intake
3. Refrigeration unit
4. Mounting support
5. Condensation water pipe
6. Seawater pump
7. Filter
8. Seawater supply valve
9. Conditioned air outlet
10. Manual control
11. Relay box
12. Temperature sensor
13. Seawater drainage pipe
14. Thru-hull fitting
15. Seawater supply
16. Seawater intake filter
- Refer to the manufacturer's instructions for
use and maintenance.
- When the air conditioning is running, check
visually that the seawater has been fully drained.
- Never start the generator when the air
conditioning is already on.
- Always turn off the air conditioning before
turning off the generator.
- Regularly check and clean the seawater
filter placed on the thru-hull seawater intake:
- Close the seawater intake valve;
- Unscrew the top of the filter;
- Clean the filtering screen;
- Put everything back in place.
- Clean the air filter (located in the
compressor) regularly for maximum
performance.
- Clean the cooling coil at least once a year.
- To prevent the air-conditioning circuit from
freezing: never run the system when the
seawater temperature drops below 5°C.
- Winterisation: drain the whole seawater
system.
- The cooling gas circuit requires no
maintenance.
Onbo
ard co
mfor
t
12 12