BENETEAU 461 Owner'S Manual Download Page 130

Page: 130 / 254

130

197837 RCD-2

Index C

10.3 MICROWAVE

General points

- The microwave is AC powered.

- A breaker protects the electrical circuit.

- The microwave is designed to reheat food and drink or to cook food. Any other use is dangerous and must be strictly
avoided.

- The microwave must never be started when empty.

- Remove all foil or metallic packaging elements before putting food in the microwave.

- Remove airtight coverings from packaging before putting food in the microwave.

Starting up

- Use the switch to select the desired power source (shore power or generator).

- Put the microwave circuit-breaker in the ON position.

Maintenance

- Regularly check the door seals.

- Regularly clean the inside of the fridge with a damp sponge.

Refer to the manufacturer's instructions for

use and maintenance.

Domestic appliances

Summary of Contents for 461































































































































































































































































Search results

Summary of Contents for 461

Reviews:

Brands by name

Popular brands

BENETEAU 461, Owner'S Manual

Search results

Summary of Contents for 461

Reviews:

Brands by name

Popular brands