BENECOM BEM-100B, User Manual

Page: 71 / 73

User’s Manual
BEM-100B/C Series User’s Manual 71
2.3.12 Set User Password
You can set password to be able to enter/change the options of setup menus.
Follow these steps to change the password.
y
Choose the “Set Password” option from the “Initial Setup Screen” menu and press
<Enter>. The screen displays the following message:
y
Please Enter Your Password
y
Press <Enter>.
y
If the CMOS is good and this option has been used to change the default password,
the user is asked for the password stored in the CMOS. The screen displays the
following message:
Please Confirm Your Password
y
Type the current password and press <Enter>.
y
After pressing <Enter> (ROM password) or the current password (user-defined), you
can change the password stored in the CMOS. The password must be no longer than
eight (8) characters. Remember, to enable the password setting feature, you must first
select either “Setup” or “System” from the “Advanced BIOS Features” menu.