BENECOM BEM-100B, User Manual

Page: 65 / 73

User’s Manual
BEM-100B/C Series User’s Manual 65
Max. Power Saving Maximum power management, HDD Power Down =1 Min
User Defined
Allows you to set each mode individually. When not disabled, each
of the ranges are from 1 min. to 1 hr. except for HDD Power Down
which ranges from 1 min. to 15 min. and disable.
2.3.5.6 Video Off Method
Use this to select the method to turn off the video. The choices are “Blank Screen”, “V/H
SYNC+ Blank”, and “DPMS”.
2.3.5.7 Video Off In Suspend
When the system is in suspend mode, the video will turn off. The choices are “No” and
“Yes”.
2.3.5.8 Suspend Mode
Item Description
Min. Power Saving Minimum power management, HDD Power Down = 15 Min
Max. Power Saving Maximum power management, HDD Power Down =1 Min
User Defined
Allows you to set each mode individually. When not disabled, each
of the ranges are from 1 min. to 1 hr. except for HDD Power Down
which ranges from 1 min. to 15 min. and disable.
2.3.5.9 Soft-Off by PWR-BTTN
If you choose “Instant-Off”, then pushing the ATX soft power switch but- ton once will switch
the system to “system off” power mode. You can choose “Delay 4 sec”. If you do, then
pushing the button for more than 4 seconds will turn off the system, whereas pushing the
button momentarily (for less than 4 seconds) will switch the system to “suspend” mode.
2.3.5.10 Wake-up by PCI Card
The choices are “Enabled” and “Disabled”.
2.3.5.11 Power On by Ring
2.3.5.12 USB KB Wake-up From S3
2.3.6.3 Resume by Alarm
When Enabled, your can set the date and time at which the RTC (real-time clock) alarm
awakens the system from Suspend mode.