BENECOM BEM-100B, User Manual

Page: 37 / 73

User’s Manual
BEM-100B/C Series User’s Manual 37
7. Serial ATA connectors
(7-pin SATA1, SATA2)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives.
Install the Windows® 2000 Service Pack 4 or the Windows® XP Service
Pack1 or later before using Serial ATA.
8. ATX power connectors (20-pin ATXPWR1)
The connector is for ATX power supply plugs. The power supply plugs are designed to fit
these connectors in only one orientation. Find the proper orientation and push down firmly
until the connectors completely fit.
y
Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
y
Make sure that your power supply unit (PSU) can provide at
least the minimum power required by your system. See the
table below for details.