R76LT Installing the Tilt Tower
Page 4 of 9
BendPak TSB 82-092021
12.
Remove Cotter Pins from the Tilt Tower Cylinder Pin and remove the Pin. Set aside where they will
not be lost.
13.
Feed the Air Line from the Tilt Tower into the Tire Changer base.
14.
Insert the Main Pivot Pin through the holes in the Tire Changer Base and Tilt Tower. You may need
to tap the Pivot Shaft lightly with a Hammer or Mallet to drive the Main Pivot Pin into place. Secure
the Pivot Pin with the Washers and Nuts previously removed.
