R76LT Installing the Tilt Tower
Page 3 of 9
BendPak TSB 82-092021
9.
Remove the Tilt Tower Main Pivot Pin, Nuts and Washers from the Tire Changer. Set the Main
Pivot Pin, Nuts and Washers aside to prevent loss.
10.
Carefully move the Tilt Tower into place over the Tire Changer using a Forklift or Shop Crane. Take
care to not damage the bottom of the Tilt Tower or the Air Line exiting the Tilt Tower.
11.
Remove one of the Snap Rings securing the Safety Pin and remove the Safety Pin from the Tilt
Tower. Set these parts aside where they will not be lost.
