HD-14T Four Post Lift
5
P/N 5900037 — Rev. F — February 2022
•
While the Lift is in use, keep all body parts well away from it.
•
You
must
wear OSHA-approved (publication 3151) personal protective equipment at all times
when installing, using, maintaining, or repairing the Lift: leather gloves, steel-toed work boots, eye
protection, back belts, and hearing protection are
mandatory
.
•
Do not use the Lift while tired or under the influence of drugs, alcohol, or medication.
•
Care must be taken as burns can occur from touching hot parts.
•
Do not operate equipment with a damaged power cord or if the equipment has been dropped or
damaged – until it has been examined by a qualified service person.
•
Do not let a cord hang over the edge of a table, bench, or counter or come in contact with hot
manifolds or moving fan blades.
•
If an extension cord is necessary, a cord with a current rating equal to or more than that of the
equipment should be used. Cords used for less current than the equipment may overheat. Care
should be taken to arrange the cord so that it will not be tripped over or pulled.
•
Always unplug equipment from electrical outlet when not in use. Never use the cord to pull the plug
from the outlet. Grasp plug and pull to disconnect.
•
To reduce the risk of fire, do not operate equipment in the vicinity of open containers of flammable
liquids (gasoline).
•
To reduce the risk of electric shock or fire, never overload receptacles. Refer to the labels for the
proper load on receptacles.
•
Adequate ventilation should be provided when working on operating internal combustion engines.
•
To reduce the risk of electric shock, do not use on wet surfaces or expose to rain.
•
BendPak recommends referring to the ANSI/ALI ALIS Standard (Current Edition)
Safety
Requirements for Installation and Service
for more information about safely installing, using, and
servicing your Lift.
•
Always wear safety glasses
! Everyday glasses only have impact resistant lenses, they are not
safety glasses.
•
Let equipment cool completely before putting away. Loop cord loosely around equipment when
storing.
•
Make an inspection of the Lift
before
using it. Check for damaged, worn, or missing parts. Do not
use it if you find any of these issues. Instead, take it out of service, then contact an authorized
repair facility, your dealer, or BendPak at
(800) 253-2363
•
BendPak recommends making a
thorough
inspection of the product at least once a year.
Replace any damaged or severely worn parts, decals, or warning labels.
•
The Lift uses electrical energy; if your organization has Lockout/Tagout policies, make sure to
implement them after connecting the Lift to a power source.
•
When handling the Hydraulic components,
always wear safety gloves!
In rare cases, a
needle-like stream of Hydraulic Fluid (even at low pressure) can penetrate fingers, hands, or arms.
Such a puncture can feel like a bite, electric shock, or a prick. While it may seem like a minor issue,
any amount of Hydraulic Fluid injected into the human body is a serious issue. Anyone suffering
such a puncture wound should be
immediately
taken as an emergency to the hospital to
determine the extent of the injury. Explain the circumstances of the injury to the attending
physician, including what type of Hydraulic Fluid was involved. Do not assume a puncture wound
that could have been caused by Hydraulic Fluid is a minor issue; it could be life-threatening.
Save these instructions!
Summary of Contents for HD-14T
