BendPak 5175254, Service Manual

Page: 26 / 33

6
11
5
4
9
1
10
2
7
3
8
12
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
NEXT ASSEMBLY
5215830
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C
ADDED 5700012, WAS Ø35 NOW Ø38.0,
5701568 HEIGHT WAS 50 NOW 38.0, UPDATED
BOM REVISIONS
04/09/2020 TM 01120
D
ADDED (2) 5700012, 5735682 DISTANCE WAS
219.5 NOW 257.0
07/06/2020 TM 01173
E 5735682 DISTANCE WAS 257.0 NOW 225.0 09/25/2020 TM 01209
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5735682 D4-9, GP-9 CYLINDER FIXED PLATE 1 B
2 5735719 D4-9, GP-9 RUNWAY HOSE RING 4 A
3 5701613 D4-9, GP-9F BARE RUNWAY 1 A
4 5701612 D4-9, GP-9F ROLLING JACK RAIL 1 A
5 5735688 D4-9, GP-9 RAIL END CAP 2 A
6 5701585 D4-9, GP-9 CYLINDER FRONT BRACKET 1 B
7 5701584 D4-9, GP-9 CYLINDER BRACKET 1 A
8 5737099 D4-9, GP-9 PULLEY SPACER Ø38mm 8 A
9 5701586 D4-9, GP-9 CYLINDER REAR BRACKET 1 C
10 5701568 D4-9, GP-9 SAFETY ROD BRACKET 2 A
11 5505067 D4-9, GP-9 CABLE RETAINING ROD 6 A
12 5700012 HOSE RETAINER 7 B
WHERE USED
D4-9
GP-9F
SHEET 1 OF 3
REV DWG. NO.
A
SIZE
TITLE:
NAME DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TS
5601348
D4-9, GP-9F POWER SIDE
RUNWAY WELDMENT
02/25/2019
DO NOT SCALE DRAWING
1:25 SCALE:
THIRD ANGLE PROJECTION
OR 10/01/2020
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
BREAK AND DEBURR ALL SHARP EDGES 0.3mm 2.
REMOVE ALL WELD SPLATTER 3.
DIMENSIONS SHOWN ARE AFTER PAINTING 4.
PAINT BLACK (RAL-9017) 20% GLOSS 5.
NOTE: UNLESS OTHERWISE SPECIFIED.