NRTL_Lifting_Cap_9K_ENG-FRE.pdf:
Size:
4.5"W x 3.25"H
Material: 4 Mil. Permanent White Adhesive Vinyl
Ink:
U.V. protected CMYK 2/C Process
Finish:
Matte Overlaminate (No gloss)
Print Process:
Offset Lithography - 200 line-screen or 300
p.p.i. for digital
Lamination:
Clear laminate non-glare medium matte over-
laminate (No gloss) for abrasion, chemical and ultra violet
protection.
Product_Data_Label_5905940-New.pdf:
Size: 4.5"W x 2.75"H
Material: 4 Mil. Permanent White Adhesive Vinyl
Ink:
U.V. protected CMYK 2/C Process
Finish:
Matte Overlaminate (No gloss)
Print Process:
Offset Lithography - 200 line-screen or
300 p.p.i. for digital
Lamination:
Clear laminate non-glare medium matte
over-laminate (No gloss) for abrasion, chemical and ultra
violet protection.
GP-9 Series Product Decal Positioning
I
H
PN 5905940
PN 5905650
ATTENTION
MAXIMUM LIFTING CAPACITY
CAPACITÉ DE LEVAGE MAXIMUM
P/N 5905650
9000 Lbs.
4082 Kg.
G
DANGER
Exceeding the weight capacity of this lift can damage lift and/
or property and may cause personal harm, injury or death to
operators and/or bystanders. All vehicles MUST be positioned
on lift with CENTER OF GRAVITY midway between adapters
and/or centered on runways. Damage to lift due to
overloading or misuse IS NOT covered under warranty.
Le dépassement de la capacité de poids de cet élévateur peut
endommager l’ascenseur et / ou les biens et peut causer des
dommages corporels, des blessures voire la mort aux opéra-
teurs et / ou aux passants. Tous les véhicules DOIVENT être
placés sur l’élévateur avec le CENTRE DE GRAVITÉ à mi-chemin
entre les adaptateurs et / ou au centre des pistes. Dommages à
soulever dus à la surcharge ou une mauvaise utilisation N’EST
PAS couverte par la garantie.
THE MAXIMUM LIFTING CAPACITY
FOR THIS LIFT IS DESCRIBED BELOW
LA CAPACITÉ DE LEVAGE MAXIMUM
POUR CE LEVAGE EST DÉCRIT CI-DESSOUS
Maximum Lifting Capacity
9,000 lbs. / 4,082 kg
Capacité de Levage Maximale
9,000 lbs. / 4,082 kg
Max. Lifting Cap. / Front of Lift Center
4,500 lbs. / 2,041 kg
Max. Capuchon De Levage. / Avant du centre de relèvement
4,500 lbs. / 2,041 kg
Max. Lifting Cap. / Rear of Lift Center
4,500 lbs. / 2,041 kg
Max. Capuchon De Levage. / Arrière du centre de levage
4,500 lbs. / 2,041 kg
P/N 5905402
Max. Cap. Danger 9K ENG-FRE.pdf:
Size: 4"W x 8.25"H
Material: 4 Mil. Permanent White Adhesive Vinyl
Ink:
U.V. protected CMYK 2/C Process
Finish:
Matte Overlaminate (No gloss)
Print Process:
Offset Lithography - 200 line-screen or 300 p.p.i.
for digital
Lamination:
Clear laminate non-glare medium matte over-lami-
nate (No gloss) for abrasion, chemical and ultra violet protection.
PN 5905402
Safety Instructions
: If attachments, accessories, or configuration-modifying components that are
located in the load path affect operation of the lift, affect the lift electrical listing, or affect intended
vehicle accommodation are used on this lift and, if they are not certified for use on this lift, then the
certification of this lift shall become null and void. Contact the participant for information pertaining
to certified attachments, accessories, or configuration-modifying components.
BendPak
lifts are supplied with concrete fasteners meeting the criteria as prescribed by ASTM E488/
E488M-18. Lift buyers are responsible for any special regional, structural, and/or seismic anchoring
requirements specified by any other agencies and/or codes such as the Uniform Building Code (UBC)
and/or International Building Code (IBC).
The manufacture, use, sale, or import of this product may be subject to one or more United States
patents, or pending applications, owned by
BendPak Inc.
1645 Lemonwood Dr.
Santa Paula, CA USA
www.BendPak.com
LIFT TYPE:
Surface Mount
MANUFACTURER:
BendPak. See data plate for product details
POWER:
Electric/Hydraulic
INSTALLATION:
See manual or contact factory
Do Not Remove
Engineered by BendPak Inc., USA
Made in China
PN 5905940
