____________________________________________________________________________
89000004-101
KI 300 Installation Manual
Rev 1
Page 4-6
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 4-7 Thread Depth Limit
4.6
Unit Mounting
1.
The unit connects to the mounting bracket utilizing two upper tabs and a lower fastener.
2.
Place vibration gasket on unit before installing unit onto bracket.
3.
The unit is installed by engaging the two upper tabs first, then securing the bottom screw.
4.
Hold the unit at a slight angle off of the instrument panel (as shown below) and align the upper
tabs with the slots on the rear of the unit.
Foam Filter
(Do Not
Remove)
Max 0.3 Inches
Insertion Depth
Motion 1:
Motion 3:
Motion 2:
