____________________________________________________________________________
89000004-101
KI 300 Installation Manual
Rev 1
Page 2-6
© Honeywell International Inc. Do not copy without express permission of Honeywell.
2
GENERAL INFORMATION
2.1
Introduction
This manual describes the installation of the BendixKing KI 300 Electronic Attitude Indicator. It is
intended for use by FAA certified repair stations to install the KI 300 indicator and includes both
mechanical and electrical installation information.
System configuration, and continued airworthiness are included. The installer must ensure that all
functions are operating properly according to their intended purpose in their particular installation.
Visit the BendixKing web site (
www.bendixking.com
) for current updates and supplemental information
concerning the operation of this and other BendixKing products.
2.2
KI 300 Overview
The KI 300 Electronic Attitude Indicator is a panel mounted attitude, airspeed, altitude, vertical speed
and slip. The instrument is self-contained and directly incorporates all of the sensors required to
measure and display the listed flight parameters.
All information is displayed on a color 3.5” diagonal LCD display in traditional aeros
pace symbology. The
unit also contains a rechargeable battery capable of providing continued operation in the event of
aircraft electrical failure.
2.2.1
System Functions
The KI 300 performs the following functions:
Display of Indicated Airspeed (Knots or Mph)
Display of Barometric Altitude (Feet)
Display of Roll & Pitch (Fixed Pointer Format, Degrees)
Display of Slip Indication (Degrees)
Display of Vertical Speed Indication (feet per minute)
Pilot Entered Baro Correction (mb or inHg
–
Configurable Default Value)
Automatic and Manual Backlight Control (%)
Display of Battery Charge Status (% Remaining)
Display of V-Speed Limitations (Colored Bands)
Altitude Bug (Pilot Adjustable) (For reference only, not and altitude pre-select function)
Display of Flight Director Command Bars (When interfaced with the KA 310)
Display of Decision Height Alert (When interfaced with the KA 310)
Various parameters can be configured by the installer (not pilot accessible):
