89000046-014
KSN 780/8XX/900 AeroNav AML STC Installation Manual for Helicopters
Rev 0
Page 7-36
© Honeywell International Inc. Do not copy without express permission of Honeywell.
To configure the network password (PSK)
NOTE:
This value will be supplied by the device with which you are attempting to connect.
1.
Boot the AeroNav to Maintenance mode.
2.
Select the "Config" tab.
3.
Turn the right knob until the "Wifi Configuration" Page is displayed as shown in the image
below.
Figure 29 WiFi Configuration Page
4.
Press the lower right knob
5.
Using the outer right knob, advance the selection rectangle until the Remote PSK field is
selected as shown:
Figure 30 WiFi Configuration Page
6.
Press the right knob