Settings
Settings
iso685-x-B_D00177_07_M_XXEN/07.2019
37
9.2
(5.2.3) Summer time
Summer time can be considered in the following settings:
9.2
(5.2.4) Date
Entering the current date based on the time format.
9.2
(5.2.5) Format (date)
Select the date format that you want to be displayed:
9.2
(5.2.6) NTP
Select whether you would like to synchronise the current time via NTP. To use this func-
tion you must configure the NTP server
.
9.2
(5.2.7) NTP server
Set the IP address of the NTP server.
9.2
(5.2.8) UTC
Set the time according to UTC (coordinated world time). For Germany, set +1 for winter-
time (CET) and +2 for summer time (CEST).
9.2
(5.3) Interface
Menu for connecting and parameterising other devices to the ISOMETER.
•off
No automatic change between summer time and standard time.
•DST
Daylight Saving Time
Automatic time change according to North American regulation.
Start: Second Sunday in March from 02:00 a.m. to 03:00 a.m. (local time)
End: First Sunday in November from 03:00 a.m. to 02:00 a.m. (local time)
•CEST
Central European Summer Time
Automatic time change according to Central European regulation.
Start: Last Sunday in March from 02:00 a.m. CET to 03:00 a.m. CEST.
End: Last Sunday in October from 03:00 a.m. CEST to 02:00 a.m. CET.
•dd.mm.yy
day, month, year
•mm-dd-yy
month, day, year
•on
Synchronisation via NTP server is activated.
•off
Synchronisation via NTP server is deactivated.
9.2
(5.3.1) Write access
Set whether the device can be parameterised externally via Modbus or web server. Dis-
playing and reading out data via Modbus and web server is always possible, regardless of
this setting.
9.2
(5.3.2) Ethernet
Set the parameters for communication with other devices via the Ethernet interface. The
Ethernet interface can be used for communication with Modbus, web server and BCOM.
9.2
(5.3.2.1) DHCP
Select whether you want to use automatic address assignment via your DHCP server. If
the automatic IP address assignment is enabled, the IP address, the subnet mask and the
standard gateway will be automatically assigned. If the automatic IP address assignment
is disabled, these settings must be made manually in the menu.
You can view the IP address in the "Info" menu.
9.2
(5.3.2.2) IP (manual configuration)
Set the appropriate IP address for the ISOMETER®. Make sure that the address of the de-
vice is within the address range of your network. For information on the address range of
your network, contact your network administrator.
9.2
(5.3.2.3) SN (manual configuration)
Set the appropriate subnet mask. (Standard subnet mask: 255.255.255.0) Contact your
network administrator for more information.
•Allow
Allow external parameter setting.
•Deny
Refuse external parameter setting.
1. DHCP:
Entering a DHCP server
2. IP:
Entering an IP address
3. SN:
Entering a subnet mask
4. Std.GW:
Entering a standard gateway
5. DNS:
Entering a DNS server
6. Domain
Entering a domain name
•on
Automatic IP address assignment is activated.
•off
Automatic IP address assignment is deactivated.
