Commissioning
Commissioning
iso685-x-B_D00177_07_M_XXEN/07.2019
24
7.3 Recommissioning
If the device has already been put into operation once, the self test will be carried out
shortly after connecting the supply voltage. The commissioning wizard will not restart.
You can restart the commissioning wizard using the following menu path:
Menu -> Device settings -> Commissioning
This menu can be used to modify settings made previously
.
7.4 Configuring password protection for the ISOMETER® iso685
You can assign a password in the device menu.
1.
Select
Menu -> Device settings -> Password
in the device menu.
2.
Enable password protection at
Menu -> Device settings -> Passwor -> Status
by
selecting "On".
3.
Set a four-digit password at
Menu -> Device settings -> Password -> Password
. You
can use the digits 0 to 9.
Observe device status!
Once initial commissioning has been completed and the initial measure-
ment has been taken, the device changes from the alarm state to normal
state by adhering to the set response values.
Password
x.5.1
0000
Min.
Max.
0
9
Password
x.5
1. Password
****
2. Status
off
