manualshive.com logo in svg

Bender ISOMETER iso1685DP-425, Manual

Share
Download
Bender ISOMETER iso1685DP-425 Manual Download Page 17

Function

17

isoxx1685Dx-x25_D00272_07_M_XXEN/09.2022

3.5.2

Automatic self test

All supply voltages are continuously monitored. The following tests are continuously carried 
out in the background:

 

 

•

E-KE  connection 

  •

Temperature monitoring of coupling and locating current injector

A self test is automatically run at 24-hour intervals.
During the automatic self test, the alarm relays K1 (11-12-14) and K2 (21-22-24) are 

not

 swit-

ched. K3 

will not 

be switched either.

3.5.3

Manual self test

The self test is started via the TEST button of the ISOMETER®.
The following tests are only carried out in the manual self test mode:

  •

Internal flash 

 

 

•

CPU  register

 

 

•

Watchdogs

  •

Oscillator

  •

Restart of the device including re-initialisation and recalibration

  •

Connection monitoring system

During the manual self test, all alarm relays are switched.

Summary of Contents for ISOMETER iso1685DP-425


























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands