Bender B95061094, Installation Manual

Page: 32 / 44

Modbus TCP server
32 CP9xx-Kit_D00399_00_M_XXEN/07.2019
5 (0x05)
Failure line 2
6 (0x06) Insul. OT light Insulation fault operating theatre light
7 (0x07)
8 (0x08)
Failure distribution board
9 (0x09)
Failure oxygen
10 (0x0A)
Failure vacuum
11 (0x0B)
Anaesthetic gas
12 (0x0C)
Compressed air 5 bar
13 (0x0D)
Compressed air 10 bar
14 (0x0E) Failure nitrogen
15 (0x0F)
Failure CO2
16 (0x10)
Insulation UPS Insulation fault UPS
17 (0x11)
Overload UPS
18 (0x12)
Converter UPS
19 (0x13)
UPS fault
20 (0x14)
UPS emergency operation
21 (0x15) UPS test run
22 (0x16)
Failure air conditioning
23 (0x17)
Batt.op. OT-L Battery-operated operating theatre light
24 (0x18)
Batt.op. OT-S Battery-operated Sat operating theatre light
25 (0x19)
Fail.norm.supply Line normal power supply
26 (0x1A)
Fail.safet.supply Line safety power supply
27 (0x1B)
Failure UPS Line additional safety power supply
28 (0x1C)
Ins.safety supply
29 (0x1D) Fail.N conductor
30 (0x1E)
Short dist. panel Short circuit distribution board
31 (0x1F)
32 (0x20)
33 (0x21)
34 (0x22)
35 (0x23)
Standby function (Measuring function switched off (standby))
36 (0x24)
37 (0x25)
38 (0x26)
Batt.op. UPS Battery operation, special safety power supply
39 (0x27)
Phase sequ. left
40 (0x28)
Failure UPS Battery-supported safety power supply
41 (0x29)
66 (0x42)
67 (0x43)
Function test until: Date
68 (0x44) Service until: Date
69 (0x45)
Ins.fault locat Insulation fault location
70 (0x46)
Peak Fault EDS system
71 (0x47)
Insulation fault Insulation resistance in
Ω
72 (0x48)
Current Measured value in A
73 (0x49)
Undercurrent
74 (0x4A)
Overcurrent
75 (0x4B) Residual current Measured value in A
76 (0x4C)
Voltage Measured value in V
Value
Measured value description
alarm message operating
Note