Bender B95061094, Installation Manual

Page: 38 / 44

Troubleshooting
38 CP9xx-Kit_D00399_00_M_XXEN/07.2019
6. Troubleshooting
6.1 Malfunctions
If the CP9… causes malfunctions in the connected networks, please refer to this manual.
6.1.1 What should be checked?
For the CP9…, check whether

the device is supplied with the correct supply voltage U
S
.

the BMS bus cable is correctly connected and terminated (120
Ω
).

the BMS address is set correctly.

the BCOM address settings are correct.
6.1.2 Frequently asked questions
How do I access the device if the address data are unknown?
1. Connect the device directly to a Windows PC using a patch cable
2. Activate the DHCP function on the PC.
3. Wait around one minute.
4. Access is now possible using the following pre-defined IP address: 169.254.0.1.
5. Now set the new address data.
Frequently asked questions on the Internet
You will find FAQs on many Bender devices at:
http://www.bender.de > Service & support > Rapid assistance > FAQ
6.2 Maintenance
The device does not contain any parts that must be maintained.
Document the new settings as a PDF file
Use the backup function to save all settings of the device (see Kapitel „3.2 Device
features" as well as the COMTRAXX® manual).