Profi le of Features
7.
X/K/Ka/SWS Band Visual Alerts
: the alert received
is confi rmed by the illumination of the appropriate
LED.
8.
Four-LED Display
: LEDs illuminate sequentially to
confi rm signal strength of Radar signals. A different
alert pattern confi rms detection of Laser and Safety
Warning
System.
9.
Audio Speaker
: all audible alerts are emitted from
this
location.
10.
Antenna Sensor
: contains the electronics which
detect police Radar. This antenna sensor installs
within the engine compartment of the vehicle.
11.
Antenna Face
: receiving portion of the antenna
sensor must have a clear, unobstructed view of the
road
ahead.
12.
Front Laser Sensor
: with 11' cable mounts onto the
windshield using the supplied suction cup.
13.
Rear Laser Sensor
: with 17' cable mounts to rear
window of vehicle.
14.
Windshield Accessory Cover
: remove the cover to
insert the suction cup mount.
15.
Optical Opening
: Laser signals are received at this
side of the Laser sensor which must have a clear,
unobstructed view of the road ahead.
Description of Features
Power-on Test Sequence
Each time your unit is turned on, alerts for Laser, X, K,
Ka and Safety Warning System are presented briefl y.
This is immediately followed by the status of the four
Selectable
Features:
1.
Auto Mute
– a clicking tone confi rms if feature is
engaged.
2.
Safety Warning System
– illumination of the green
“S” LED confi rms if feature is engaged.
3.
X/K/Ka Bands
– illumination of the appropriate LED
confi rms if band is activated. Full illumination of four
signal strength LEDs, coupled with the illumination of
the Ka LED confi rms Super Wideband Ka mode.
4
5
1.
Remote Control Panel Unit
: compact design fi ts
discretely and easily in any vehicle.
2. PWR (
Power
) Button: pressing PWR briefl y will turn
the unit ON. Pressing PWR a second time will cancel
the power-up test sequence.
3. H/C
(
Highway/City
) Indicator: illuminates green for
highway mode, and amber for the City X mode. City
X/K/Ka is confi rmed by the fl ashing green/amber LED,
followed by solid illuminator of the amber LED.
4. DRK (
Bright/Dim/Dark
) Button: provides dim or
dark settings of the LED display for discreet night
travel. Audio alerts are not affected by this mode.
5. AUD
(
Audio-Mute
) Button: provides manual muting
of X, K, Super Wideband Ka Radar and SWS alerts.
Pressing and holding the AUD button will change the
audio
level.
6. CTY
(
City/Highway
) Button: minimizes unwanted X
band alerts without reducing sensitivity. City X/K/Ka
reduces falsing on all three bands.
23499_BEL_975eOM.indd 5-6
23499_BEL_975eOM.indd 5-6
5/14/07 9:38:37 AM
5/14/07 9:38:37 AM
