background image

OWNER’S MANUAL

If you do not have prior experience

with a metal detector, we strongly
recommend that you:

1) Adjust the Sensitivity to a low

setting in the event of false
signals. 
Always begin use at a
reduced sensitivity level; this
device is designed to work
“into-the-noise”, so expect
chatter at high sensitivity.

2) Do not use indoors.  This

detector is for outdoor use only.
Many household appliances
emit electromagnetic energy,
which can interfere with the
detector.  If conducting an

indoor demonstration, turn the
sensitivity down and keep the
searchcoil away from
appliances such as computers,
televisions and microwave
ovens.  If your detector beeps
erratically, turn off appliances
and lights.

Also keep the searchcoil away
from objects containing metal,
such as floors and walls.

3) Use a 9-volt ALKALINE battery

only.
Do not use Heavy Duty
Batteries.

TREASURE HUNTER’S CODE OF ETHICS:

• Always check Federal, State, County and local laws before searching.

• Respect private property and do not enter private property without the owner’s permission.

• Take care to refill all holes and leave no damage.

• Remove and dispose of any and all trash and litter found.

• Appreciate and protect our inheritance of natural resources, wildlife and private property.

• Act as an ambassador for the hobby, use thoughtfulness, consideration and courtesy at all times.

• Never destroy historical or archaeological treasures.

• All treasure hunters may be judged by the example you set; always conduct yourself with

courtesy and consideration of others

5-YEAR LIMITED WARRANTY

The Titanium Camo metal detector is warranted against defects in materials
and workmanship under normal use for five years from the date of purchase
to the original owner. 

Damage due to neglect, accidental damage, or misuse of this product is not
covered under this warranty. Decisions regarding abuse or misuse of the
detector are made solely at the discretion of the manufacturer. 

Proof of Purchase is required to make a claim under this warranty.

Liability under this Warranty is limited to replacing or repairing, at our option,
the metal detector returned, shipping cost prepaid to First Texas Products.
Shipping cost to First Texas Products is the responsibility of the consumer.

To return your detector for service, please first contact First Texas for a Return
Authorization (RA) Number. Reference the RA number on your package and
return the detector within 15 days of calling to:

First Texas Products L.L.C.

1465-H Henry Brennan Dr.

El Paso, TX 79936

Phone: 915-225-0333

NOTE TO CUSTOMERS OUTSIDE THE U.S.A.

This warranty may vary in other countries, check with your distributor for details.

Factory warranty follows the channel of distribution.

Warranty does not cover shipping costs.

According to FCC part 15.21 Changes or Modifications made to this device not expressly approved by

the party responsible for compliance could void the users authority to operate this equipment.

Copyright

©

2010 by First Texas Products, L.L.C.

All rights reserved, including the right to reproduce this book, or parts thereof, in any form,

except for the inclusion of brief quotations in a review.

Published by First Texas Products, L.L.C.

Warranty coverage does not include the cost of transporting the detector
back to an owner who is located outside of the United States of America.

MDELTT

Rev.2

072913

Summary of Contents for Camo





















Reviews: