![background image](http://html1.mh-extra.com/html/beltronics/express-e916cs/express-e916cs_operating-instructions-manual_2730769011.webp)
.
Consider occupant safety when selecting a mounting location.
Choose a location where the unit will not be hazardous in
case of an accident.
.
For optimum detection, position your unit with a clear,
unobstructed view of the road from the
front and rear.
.
Do not allow the unit to make contact with the windshield.
This will eliminate unnecessary vibration.
.
Avoid placing your unit in direct sunlight. During the summer,
the interior of an enclosed vehicle can sometimes reach
temperatures that will cause premature aging of the unit.
.
Your detector is not waterproof; exposure to water may cause
damage.
Dash Mounting
.
Select an area that is relatively level, clean and dry. Adhere the
soft portion of the enclosed hook and loop fastener to this area
and the corresponding hard portion to the bottom of your unit.
.
Fasten unit to dash by placing
hook and loop pieces together.
Mounting Brackets
The visor bracket is fully
assembled. To assemble the
windshield bracket, follow this
diagram.
Visor Mounting
.
Remove the mounting bracket
cover on top of the unit by pressing on the raised dots and
pushing outward. Store the cover in a safe place.
12892 Bel Express 926/916 Man 4/26/01 2:44 PM Page 11