![background image](http://html1.mh-extra.com/html/beltronics/express-e916cs/express-e916cs_operating-instructions-manual_2730769008.webp)
Activating the City X Mode will not change Super
Wideband Ka, K or instant-on X band Radar alert patterns.
Note—the
cty
mode does not change the presentation of alerts
for Laser,
sws
™
or
vg-2
signals.
City ALL (X/K/Ka)-Model 926 only
City ALL provides an alternated approach for improving
X,
K and Ka
band selectivity and is ideal for use in areas with a
high level of microwave trasmissions which can cause falsing
on all three bands. To engage City X/K/Ka mode, press
until the Dispay shows a capital “
A
”. Once engaged, weak X, K
or Super Wideband Ka signals encountered will provide no
audible alerts until the signal strength reaches a preset level.
Visual alerts are processed the instant an X, K or Super
Wideband Ka signal is detected, keeping you quietly informed.
Reset to Factory Settings
You can reset your unit to factory settings for volume,
,
,
and Selectable Features. With the unit
,
press
and hold
button then press the
and
P
/
V
buttons
simultaneously. Two “beeps” and “
F
” in the digital display,
confirm that the unit is reset to the original factory settings.
Your unit is now
and ready for operation.
Safety Warning System
®
, vg-2
Guard
®
Alert,
60 sws
™
Digital
Voice Messages (Model E926CS only) and Digital Voice
prompts for Radar/Laser/
vg-2
Guard
®
are all features which
may be selected
or
,
depending upon your preference.
These Selectable Features are referenced by the digits
#
,
#
, #
3
and
#4
respectively.
Safety Warning System
®
(
sws
™
)—
#
When
on
, unit will provide an
sws
™
warning when
sws
™
transmitters are detected. Factory setting is
.
sele c table fe at u res
12892 Bel Express 926/916 Man 4/26/01 2:44 PM Page 8