![background image](http://html1.mh-extra.com/html/beltronics/express-e916cs/express-e916cs_operating-instructions-manual_2730769005.webp)
.
Antenna Opening:
Radar and
sws
™
signals are received by
a patented diecast antenna with integrated transition to
microstrip mixer.
.
Laser Optical Sensors:
collect Laser signals from in front and
behind.
.
Audio Alert Speaker:
all audible alerts and Digital Voice
Messages are emitted from this location.
.
Power Jack:
EXPRESS
926 and
EXPRESS
916 operate in any
vehicle with a
12
volt
dc
negative ground system (
10.5
volt to
16
volt range).
Note:
EXPRESS
916 contains the same feature set as
EXPRESS
926 pictured, except for city
X/K/Ka and 60
sws
™
Digital Voice Messages.
d e s c r ip t io n o f fe at u re s
Power-Up Test Sequence
Each time your unit is turned
, alerts for Laser, Ka, K, X and
Safety Warning System
®
are presented.After this test sequence,
illumination of digits 1, 2, 3 and/or 4 indicates if Selectable
Features are engaged
(see page 8)
. To bypass the power-up test
sequence, press the
⁄
button again. If your unit presents an
illumination pattern other than this standard power-up test
sequence, return it to
beltronics
for servicing.
Tutorial Mode
The Tutorial mode allows you to become more familiar with all
audible and visual alerts. To engage this mode, press and hold
, then press
when the unit is
off
. The unit will cycle
continuously through audio/visual alerts for Laser, Ka, K, X and
-
Guard® Alert as well as sample
sws
™ messages or
sws
™
categories (
EXPRESS
916). To exit tutorial mode, press the
⁄
button and your unit will be
and ready to receive signals.
Memory Retention of Feature Selections
Any time your unit is turned
or unplugged from the
cigarette lighter socket, all feature settings are retained in the
unit’s memory. Memory retention eliminates the need to reset
your preferred feature settings each time your unit is turned
off
and then back
.
12892 Bel Express 926/916 Man 4/26/01 2:44 PM Page 5