Belshaw Brothers 22587-20, Operator'S Manual

Page: 27 / 71

Belshaw Bros., Inc.
•
www.belshaw.com
•
Phone 206-322-5474
•
Fax 206-322-5425
iv MN-1853EN Insider TS
Preface
The Insider is designed to hold and power the
Belshaw Mark II, V, or IX Fryer and is provided
with an air filtration and fire extinguishing
system. It is not designed for any other purpose.
The operator must work safely at all times, read
included manuals, and follow all instructions and
warnings. A thorough understanding of how to
install, maintain, and safely operate the Insider
will prevent production delays and injuries.
To use the Insider safely, heed the following
warnings and all other warnings that appear in
this manual:
WARNING
THE CHARGING & SETUP OF THE PYRO-
CHEM PLC-240/300 FIRE SUPPRESSION
SYSTEM MUST BE DONE BY CERTIFIED
PERSONNEL ON A REGULAR BASIS
AND THE USE AND MAINTAINENCE OF
THE INSIDER IS TO BE IN ACCORDANCE
WITH NFPA-96.
•
To avoid damaging the machine, never
use force to assemble, disassemble,
operate, clean, or maintain it.
•
Be careful never to get shortening, water,
or other materials on the floor. If
anything does get spilled on the floor,
mop it up immediately. Materials on the
floor can cause people to slip or fall,
resulting in serious injury or loss of life.
•
To prevent unintentional startup and
possible fire, unplug the machine if there
is a local power outage. When the
power is restored, it is safe to plug the
machine in again.
•
To avoid electrocution, make sure that
all electrical cords are not frayed or
cracked and that they do not pass
through any water or shortening.
•
Make sure that all electrical cords are
routed so that no one will trip over them.
•
The Insider is “Intended for use in
noncombustible surroundings only .”