Chapter 4: Parameters Setting and Preventative Maintenance
39
E.
CHECKLIST
FMS2000 S/N:
Tested By:
Date:
Equipment
Used:
Safety Analyzer S/N:
Cal Due Date:
Pressure Source S/N:
Cal Due Date:
Thermometer S/N:
Cal Due Date:
Tachometer S/N:
Cal Due Date:
Results
1. Visual Inspection
√ if OK
a. Right Hand Side
b. Back
c. Latch/Unlatch
2. Operational Check-Out
√ if OK
d. PRIME
e. PT. LINE PRIME
f.
INFUSE ▲▼
g. AC to DC switch over
h. DC to AC switch
i.
FLUID OUT audible alarm
3. Battery Run Time test
>30 min.
4. Electrical Safety Check
(See attached Results Sheet)
√ if OK
a. Earth Leakage Current
b. Patient Leakage Current
5. Hardware verification
a. Valve Operation
√ if OK
b. Fluid Out and Air Detectors
√ if OK
c. Battery Voltage
approx. 24 V
d. Flow Rate
√ if OK
e. Input and Output Temperature Probes
√ if OK
Temp. when “Over Temp” alarm: On screen
42º to 42.5ºC
Thermocouple
1º to 2ºC of screen
f.
Pressure Sensor
√ if OK
6. Clean Pump Head
√ if done
