Failure to install appliances correctly is
dangerous and could lead to prosecution.
This appliance is not connected to a
combustion products evacuation device. It
shall be installed and connected in
accordance with current installation
regulations. Particular attention shall be
given to the relevant requirements regarding
v e n t i l a t i o n .
Before you start -
please read the
instructions carefully - planning your
installation will save you time and effort.
Look at the different ways the appliance
can be installed - as shown on the
following pages - and plan the installation
to suit your situation.
Leave the appliance in the base tray
packaging until you are ready to install it.
When you remove the appliance from the
base tray packaging, take care not to
damage it.
Whilst every care is taken to eliminate
burrs and raw edges from this product,
please take care when handling - we
recommend the use of protective gloves
during installation.
Please note that the weight of this appliance
is approximately
4 7 k g
(unpacked). Take care
when lifting it into the housing unit - always
use an appropriate method of lifting.
This appliance can be installed either at
low level - ie; under a worktop, or at high
level ie; into a tall kitchen cabinet unit.
Please note that all dimensions and sizes
given are nominal, some variation is to be
expected.
I m p o r t a n t :
Do not modify the outer
panels of this appliance in any way.
Fixing screws -
The fixing screws are in
a polythene bag in the oven pack.
Depending on the method of installation,
some of the screws may not be needed.
LP gas only
Do not install this appliance in a room
below ground level. This does not preclude
installation into rooms which are
basements with respect to one side of the
building, but open to ground level on the
opposite side.
17
Quantity
Colour
Description
For Fixing:
6
Silver
No 8 x 12mm long
Runners to appliance
Self tapping screw
12
Black
No 8 x 12mm long
Runners and sidetrims to cabinet
Chipboard screw
or housing
6
Black
No 8 x 25mm long
Appliance to cabinet
Chipboard screw
2
Silver
No 8 x 12mm long
Appliance to sidetrims
Self tapping screw
Installation Instructions
27353 00 - Belling GG720 14/6/07 14:59 Page 19
