Bellfires VENTO CLASSIC LARGE Instructions For Use & Manual Daily Maintenance Download Page 82

Page: 82 / 96

Bell

fi res

English

Installation instructions

PROPANE APPLIANCE:

1. Carefully remove the embers (1x 125 gram) from the packaging and place them

evenly on and around the

burner (not on the holes!).

Please make sure that all burner orifi ces (small holes) are kept unblocked

Note !

Small embers and their residue should not be scattered

on the burner. This can cause a blockage on the burner

orifi ces.

2. Place the logs

around

the burner: see fi gure 22.

Don’t place any logs on the burner !

Keep the burner orifi ces unblocked

Figure 22: Log set Vento Classic Large
Position propane/butane burner

PROPANE:
Keep the burner

orifi ces unblocked

Do not block the pilot light

Embers must not be placed next

to the pilot light burner

Summary of Contents for VENTO CLASSIC LARGE

































































































Search results

Summary of Contents for VENTO CLASSIC LARGE

Reviews:

Related manuals for VENTO CLASSIC LARGE

Brands by name

Popular brands

Bellfires VENTO CLASSIC LARGE, Instructions For Use & Manual Daily Maintenance

Search results

Summary of Contents for VENTO CLASSIC LARGE

Reviews:

Related manuals for VENTO CLASSIC LARGE

Brands by name

Popular brands