Bellfires VENTO CLASSIC LARGE, Instructions For Use & Manual Daily Maintenance, Page: 11 / 96

11
Bell fi res
English
Instructions for use
2.3.1 General
Read these instructions carefully before lighting the fi re !!
The appliance is opperated by radio remote control. This comprises a hand-held
transmitter and a receiver. The receiver is part of the gas control block assembly.
The receiver and the gas control block are behind the (white) panel door (operating unit)
next to the appliance. Press the door inwards to open; this will release the catch and the
door will spring out.
The hand-held transmitter and receiver are powered by batteries.
Hand-held transmitter : 1x 9V battery.
Receiver
: 4x 1.5V battery type LR6 or AA.
Option: 6V adapter (230 VAC). Available from your fi tter.
Note: Hand-held transmitter and receiver are not interchangeable with previous models.
The pilot light is situated in the front of the burner, behind a cowl. Should the pilot light
go out, you must wait fi ve (5) minutes before attempting to re-ignite the fi re.
Important
Once the fi re is lit, it must burn at maximum for approx. 10 minutes to allow the chimney
to come up to temperature!
2.3.2 Hand-held transmitter
The remote control works by radio signal. The hand-held transmitter is confi gured in the
factory with a unique signal code.
Figure 1: Hand-held transmitter