manualshive.com logo in svg

Bellfires Smart Bell Panorama 73/52 MF, Installation And Maintenance Manual, Page: 8 / 44

Share
Download
Bellfires Smart Bell Panorama 73/52 MF Installation And Maintenance Manual Download Page 8

IItem

Description

J

Convection casing

Collects the heated convection air. The con-

vection air has a natural upward flow and is

extracted by the upper front side openings of

the appliance

K DO NOT COVER openings

Protects the appliance against an overpres-

sure

2.5

Overview of the burner bed and the pilot light

Item

Description

A Grate

Combustion air gets in the combustion cham-

ber through the grate around the main burner

B Main burner (upper part)

Supplies the gas for the main upper fire

C Main burner (lower part)

Supplies the gas for the main lower fire

D Pilot light outer casing

Protective cover for the pilot light

E Pilot light burner

Supplies the gas for the pilot light

F Thermocouple

Detects if the pilot light is on

G Ignition electrode

Supplies a spark to ignite the pilot light

Description

8

Smart Bell Panorama 73/52

Summary of Contents for Smart Bell Panorama 73/52 MF













































Reviews:

No comments