
22.7.4
Overview of the receiver
Item
Description
A Reset button
Reset of the receiver
B Connection for an adapter
Optionally, a 6 VDC adapter can supply the
receiver and an optional wifi-box with power
C connection for external operating
Optionally, a wall switch or domotica system
can be connected
D 8 wire cable connection
Sends signals to the gas regulator block
E Thermocouple voltage / current IN (red con-
nection)
Connection to the thermoelectric pilot light
shut-off wire IN
F Thermocouple voltage / current OUT (yellow
connection)
Connection to the thermoelectric pilot light
shut-off wire OUT
G Piezo cable connection
Connection for the piezo cable which is con-
nected to the ignition electrode of the pilot
light
H Connection to the gas valve rear burner
(AUX)
Sends a signal if the rear burner must burn
I
Battery compartment cover
Batteries are not applicable in the receiver for
this appliance. (Power is supplied by the fan/
light module.)
J
Connection for a wifi-box (SI)
Optionally, a wifi-box can be connected to the
receiver to control the appliance with a smart-
phone or tablet with the Bellfires app
K Connection for the fan/light module (MOD-
ULE)
To control the light function
Description
Smart Bell Panorama 73/52
15