Bellfires HORIZON BELL SMALLTUNNEL 3, Installation Instructions And Instructions For Use

Page: 11 / 102

11
Bell fi res
English
Instructions for use and installation instructions
2.4.1 Igniting the fi re
• Open the gas supply valve in the gas pipe to the appliance.
• Press in the control knob and turn it (clockwise) as far as possible. It is now in the
“off” position.
• Press the control knob and turn it anti-clockwise to the “PILOT” ignition position.
You will hear a click, which is the spark for the pilot light. You may have to “click”
several times before the pilot light ignites.
• Once the pilot light is ignited, hold in the knob for another ten (10) seconds and
then release it.
Important: If the pilot fl ame goes out, then wait for at
least 5 minutes before repeating the above
procedure.
• The burner is ignited by turning the knob anti-clockwise to the desired setting.
Important: • When the main burner is switched on by turning
the motor knob to the left, the burner must
ignite within 10 seconds.
If this does not happen, immediately close the
gas tap and warn the fi tter.
• If the main burner ignites with a pop;
immediately close the gas tap and warn
the fi tter.
2.4.2 Turning off the fi re
Press the knob and turn it to “PILOT”.
The burner will continue to burn for a few seconds before being extinguished.
2.4.3 Extinguishing the pilot light
You can extinguish the pilot light by pressing the control knob when it is in the “PILOT”
position and turning it clockwise to the “OFF” position.
If the gas fi re is not going to be used for a long period of time, it is recommended to
close the gas supply valve to the fi re.
Important: If the pilot fl ame goes out for any reason,
wait for 5 minutes before attempting to
re-light it.
If the pilot light frequently goes out, then please contact your installer.