Bell and Howell Sidekick 1200 Operator'S Manual Download Page 13

Page: 13 / 108

Roller Cleaning Paper

NOTE:

Before using the roller cleaning paper, please read these instructions completely. Keep these instructions
for future reference.

English
English

WARNING:

•

Keep away from fire.

•

Do not drink or inhale the roller cleaning paper fluid.

•

The roller cleaning paper may be harmful to your skin.

Please use protective gloves.

•

Do not use the roller cleaning paper near a heater or

open flame. This may cause a fire.

•

Do not store the roller cleaning paper in direct sunlight

or in a location over 104

F (40

C).

•

Only use the roller cleaning paper to clean the rollers

and scanning area.

•

If you need more information about the roller cleaning paper, please refer to the Material Safety Data

Sheet (MSDS) available upon request at Böwe Bell + Howell Scanners.

Summary of Contents for Sidekick 1200













































































































Search results

Summary of Contents for Sidekick 1200

Reviews:

Related manuals for Sidekick 1200

Brands by name

Popular brands

Bell and Howell Sidekick 1200, Operator'S Manual

Search results

Summary of Contents for Sidekick 1200

Reviews:

Related manuals for Sidekick 1200

Brands by name

Popular brands