19
19
Troubleshooting Guide
1
2
3
4
5
6
19
Devices
Devices on the Expansion Dock’s USB ports do
not operate.
You must install the software drivers (as described in the
“Installing the Software Drivers” section, above) in order for
USB devices to work with the Expansion Dock. If you plug
a device into a USB port on the Expansion Dock before
you install the drivers, your notebook will not recognize
the device and the device will not work. lf the software is
installed and devices do not work, follow these steps:
1.
Be sure that the power adapter is plugged into the
Expansion Dock and into a working electrical outlet,
and that the ExpressCard is firmly connected to
the notebook.
2.
Unplug and re-plug the USB cable into the same USB
port. If this does not correct the problem, plug the
device into a notebook USB port. If the device still does
not work, there may be a problem with the device.
3.
If the device works, plug the device into each of the
Expansion Dock’s USB ports to verify that it works with
each. If some ports do not work, there may be a
problem with the Expansion Dock. Call Belkin Technical
Support at 800-223-5546 ext. 2263.
