![Belkin 54g User Manual Download Page 92](http://html1.mh-extra.com/html/belkin/54g/54g_user-manual_2728051092.webp)
90
TROUBLESHOOTING
My connection type is
“static IP address”. I cannot
connect to the Internet.
My connection type is
“dynamic IP address”. I
cannot connect to the
Internet.
1. Since your connection type is “static IP
address”, your ISP must assign you the IP
address, subnet mask, and gateway address.
Make sure that the Router’s connection type
is configured as “Static IP Address” and
verify your settings.
2. Your ISP may bind your connection to the
MAC address of your computer’s NIC. Clone
your MAC address.
1. Make sure your computers are correctly
configured and all network cables are
properly connected.
2. Make sure the cable or DSL line is properly
attached on your cable or DSL modem. Refer
to the manual of your modem to verify that
it works normally.
3. Make sure the network cable between the
modem and the barricade is well connected.
Power off the modem; wait a few seconds
and then power it on again.
4. Your ISP may bind your connection to the
MAC address of your computer’s NIC. Clone
your MAC address.
Summary of Contents for 54g
Page 97: ...95...