CONNECTING AND CONFIGURING YOUR ROUTER
12
Easy Install Wizard
Belkin has provided our Easy Install Wizard software to make installing your
Router a simple and easy task. You can use it to get your Router up and running
in minutes. The Easy Install Wizard requires that your Windows 98, Me, 2000, or
XP computer be connected directly to your cable or DSL modem and that the
Internet connection is active and working at the time of installation. If it is not,
you must use the “Alternate Setup Method” section of this manual to configure
your Router. Additionally, if you are using an operating system other than
Windows 98, Me, 2000, or XP, you must set up the Router using the “Alternate
Setup Method” section of this manual.
Step 1: Run the Easy Install Wizard Software
1.
Shut down any programs that are running on your computer at this time.
2.
Make sure you have the following items at the computer that is now directly
connected to the cable or DSL modem.
DO NOT CONNECT THE ROUTER AT
THIS TIME.
• The Easy Install Wizard CD-ROM
• The Router
• The Router power supply
• Category 5 networking cable
• This User Manual
3.
Turn off any firewall or Internet connection sharing software on your
computer.
4.
Insert the Easy Install Wizard software CD into your CD–ROM Drive. The Easy
Installation Wizard screen will automatically appear on your screen within 15
seconds. If it does not, select your CD-ROM drive from “My Computer” and
double-click on the file named “Setup” on the CD-ROM.
IMPORTANT:
Run the Easy Install Wizard from the computer that
is directly connected to the cable or DSL modem.
DO NOT CONNECT THE ROUTER AT THIS TIME.
Summary of Contents for 54g
Page 97: ...95...
