Belimo UK24BAC, Technical Data Manual

Page: 3 / 20

UK24BAC Belimo Gateway MP to BACnet MS/TP
www.belimo.com T9-
UK24BAC • en • v1.9 • 06.2018 • Subject to changes
3 / 20
Gateway MP BACnet MS/TP. MP-bus-
capable Belimo actuators can be
connected on the MP-Bus side.

Interface MP
– BACnet MS/TP

Connection of MP/MPL/MFT(2)
actuators and BF-TopLine
actuators to BACnet MS/TP

Up to 8 actuators and sensors can
be connected
Technical data
Electrical data Nominal voltage AC 24 V, 50/60 Hz / DC 24 V
Power supply range AC/DC
21.6…26.4 V
For wire sizing 3 VA / 1.8 W
Connection BACnet MS/TP
Supply
MP-Bus
Tool Plug-screw terminal, 3-pin
Plug-screw terminal, 2-pin
Plug-screw terminal, 3-pin
(All terminals suitable for 2 x 1.5 mm
2
)
RJ12
Functional data Supported actuators MP/MPL/MFT(2), BF-TopLine
Quantity of actuators max. 8 pcs.
Communication with actuators Belimo MP-Bus, Master-Slave, 1200 Bd
Maximum signal conductor lengths MP Dependent on the number of connected actuators,
actuator type, type of supply and signal conductor
cross-section
For details see page 5
BACnet Device Profile
Medium
Number of nodes
Baud rates
Termination
Polarisation Application Specific Controller (B-ASC)
MS/TP (RS-485) master, galvanically isolated
max. 32 (without repeater)
9'600, 19'200, 38'400, 76'800 Bd,
adjustable via DIP switch
120

, adjustable via DIP switch
510

, adjustable via DIP switch
Safety Protection class III Safety extra-low voltage
EMC CE pursuant to 2004/108/EC
Ambient temperature 0
…+40 °C
Installation / Dimension / Weight
Mounting Control cabinet installation,
can be snapped onto top hat rail 35 mm
Dimensions see page 7
Weight ca. 100 g