800-543-9038
USA
866-805-7089
CANADA
203-791-8396
LATIN AMERICA
203
GMX24-MFT95
Proportional, Non-Spring Return, 24 V, 0 to 135
Ω
Input
Technical Data
GMX24-MFT95
Power supply
24 VAC ± 20% 50/60 Hz
24 VDC ± 10%
Power consumption
4.5 W (1.5 W)
Transformer sizing
7 VA (Class 2 power source)
Electrical connection
18 GA plenum rated cable
1/2” conduit connector
protected NEMA 2 (IP54)
3 ft [1m]
Overload protection
electronic throughout 0 to 95° rotation
Operating range WRB
135
Ω
Honeywell Electronic Series 90,
0 to 135
Ω
input
Feedback output U
2 to 10 VDC, 0.5 mA max
VDC variable
Angle of rotation
max. 95°, adjustable with mechanical stop
electronically variable
Torque
360 in-lb [40 Nm]
Direction of rotation
reversible with
switch
Position indication
reflective visual indicator (snap-on)
Manual override
external push button
Running time
150 seconds (default)
variable (100 to 280 seconds)
Humidity
5 to 95% RH non condensing (EN 60730-1)
Ambient temperature
-22°F to 122°F [-30°C to 50°C]
Storage temperature
-40°F to 176°F [-40°C to 80°C]
Housing
NEMA 2, IP54, UL enclosure type 2
Housing material
UL94-5VA
Agency listings†
cULus acc. to UL 60730-1A/-2-14,
CAN/CSA E60730-1:02,
CE acc. to 2004/108/EEC and 2006/95/EC
Noise level
<45dB(A)
Servicing
maintenance free
Quality standard
ISO 9001
Weight
3.4 lbs [1.55 kg]
† Rated Impulse Voltage 800V, Type of action 1, Control Pollution Degree 3.
T
i
i lb f
l f d
f
f
Torque min. 360 in-lb for control of damper surfaces up to 90 sq ft.
Application
For proportional modulation of dampers in HVAC systems. Actuator sizing should be
done in accordance with the damper manufacturer’s specifications.
The actuator is mounted directly to a damper shaft up to 1.05” in diameter by means
of its universal clamp. A crank arm and several mounting brackets are available for
applications where the actuator cannot be direct coupled to the damper shaft.
The default parameters for 0 to 135
Ω
input applications of the …MFT95 actuator are
assigned during manufacturing. If necessary, custom versions of the actuators can be
ordered. The parameters can be changed by two means: pre-set and custom
configurations from Belimo or on-site configurations using the Belimo PC-Tool
software.
Operation
The actuator is not provided with and does not require any limit switches, but is
electronically protected against overload. The anti-rotation strap supplied with the
actuator will prevent lateral movement.
The GMX series provides 95° of rotation and a visual indicator indicates position of the
actuator. When reaching the damper or actuator end position, the actuator
automatically stops. The gears can be manually disengaged with a button on the
actuator cover.
The GMX24-MFT95 actuators use a brushless DC motor, which is controlled by an
A
Application Specific Integrated Circuit (ASIC). The ASIC monitors and controls the
actuator’s rotation and provides a digital rotation sensing (DRS) function to prevent
damage to the actuator in a stall condition. Power consumption is reduced in holding
mode.
A
Add-on auxiliary switches or feedback potentiometers are easily fastened directly onto
the actuator body for signaling and switching functions.
Dimensions
(Inches [mm])
2.9”
[72.9]
4.55”
[115.6]
7.02” [178.4]
5.37” [136.4]
1.42”
[36]
5.6” [142.4]
2” [50.8]
1/2” to 1.05” [12.7 to 26.67]
2/5” to 1.05” [10 to 26.67]
To center of
mounting slot.
D
12
3
M40024 - 05/10 - Subject to change.
© Belimo
Aircontrols (USA),
Inc.
