Battery installation
1- Remove the battery door;
2- Place the 2 rechargeable batteries controlling the polarity indicated;
3- Close the battery door.
IMPORTANT: the Nickel - Metal Idrate battery, when exhausted, must be recycled or
disposed properly.
USE ONLY RECHARGEABLE BATTERIES.
Coverage range
The coverage area could be affected from manifold situations. The indication 300mt
outdoor and 50mt indoor is purely theoretical, that is obtainable only in optimal
conditions of propagation of the signal. However for a better coverage is advisable to
install the base set in a place as more central position of the building within where the
cordless must be used.
Before using the unit, check...
1) The installation was performed as well;
2) The battery has been charged properly;
3) The LCD display “
BELGACOM 1
” (keep pressing
key to switch on the handset).
To make a call
1) Press key to take phone line (the green light on the base will be on);
2) Dial the desired number;
3) Press key or place the handset on cradle to end a call (the light will switch off).
At the end of each call, the LCD will display the duration time for about 10 seconds.
How to answer the incoming call
1) Press key when the telephone rings or lift up the handset from the charge cradle
(only if the "Automatic answer" is activated).
Pre-dial
1) Dial directly the number to be called (if an error is occurred, press
C
key to delete
the last digit - or hold pressed to delete full number) ;
2) Press key to send a call. The number will be called automatically.
4
ENG
Battery charging
Put the handset into the cradle, with the keypad in front view, for at least 10 hours when
the battery is totally discharged. The red light will be on to indicate that handset is in
charging state. When charging is complete, this light remain always on.
C