background image

Thank you for your choice of the new digital cordless phone, is a DECT (Digital 
European Cordless Telephone) phone with GAP (Generic Access Profile) profile.
Together with the audio quality and to the safety offered from the digital technology,

 

 

offers manifold and useful features including, for example 30 memories for the 
phonebook,   the caller identification (with name if on phonebook), 10 volume levels...
All the features are easily accessible through a practical menu.
Thanks to the GAP profile, it is possible to connect 4 handsets to the same base station 
giving the possibility of also do an internal conversations between handsets. 
Each handset can be subscribed up to 4 bases.
Please read 

 

carefully this instructions manual before using your new   HI-Tel

 

phone.

ACCESSORIES

TWIST208

- Base unit
- Hand unit
- N. 2 rechargeable batteries AAA1.2V

     

- AC/AC  Adaptor   
- Tel-line cord and line plug           
- User’s manual
- Warranty card 

Precautions

 

1) Read this manual before to use this phone.
2) Avoid the direct exposure to solar rays and/ or fonts of heat, as like avoid the
       installation in damps places and/ or dusty.
3) Don't support objects on the cables and/ or on the phone.
4) Don't use adaptor and/ or batteries diverged from that specified on this
       instructions manual or however from those in endowment.     
5) In case of storms, disconnect the phone from power and phone lines.
6) Clean by using a cloth slightly dampened. Don't use alcohol, solvents, abrasives, etc.     
7) Don't effect reparations alone. Tampering and/ or uses not in conformity with as
       described on the present book will do decay the guarantee.
8) BELGACOM   declines any responsibility in case of improper uses or
       manipulations not conform with the instructions as described on this manual. 
9)

 

The socket-outlet shall be close to the equipment and shall be easily accessible.

TWIST208

1

ENG

Summary of Contents for TWIST208






































Reviews: