Searching of base
Following this procedure you will set to which base subscribed the handset have to be
connected.
Press MENU key, then by keys select "
REGISTER
", then press OK key;
By keys selct "
SEL BASE
" then press OK key;
Press the number of the base that you want to connect;
The handset start to search the selected base.
NOTE: if the base is not found handset remains on search mode, p
ress
C
key to exit
and
repeat the procedure but search a base more closer.
FAQ
I don't listen the line tone
-
When you press key the green led on base switch on? NO: follow
"Handset Subscription" procedure
-
YES: Try to use only TWIST208 on your telephone line, if alone
working, try to exchange the position of the telephone;.
Lost of audio during conversation or beep during conversation
- Approach to the base
station or try to position the base on a central position or also displace the base of 20-30cm. from
the previously position.
Base doesn't ring
: Check the base ring volume;
When you press a key the cordless will connect the phone line and some numbers are
displayed
:
Direct (emergency) call activated - Press MENU key then OK key;
On telephone near the base of the cordless I listen some noise
: Displace the base away of
20-30cm. respect the previous position;
Noise during conversation
:
Displace the base away of 20-30cm. respect the previous position;
Handset doesn't turn on
:
Remove and replace the batteries, pay attention at the polarity, USE
ONLY RECHARGEABLE BATTERIES AND NOT ALKALINE BATTERIES;
Receiver volume lower
:
Adjust the volume level and/or pay attention to not cover or put label
on the receiver hole;
Caller identifier doesn't work
:
Be sure that the caller identifier service was subscribed with your
Telephone network provider, try to use only TWIST208 on your phone line. If 4 or more telephone
are connected at the same phone line it can create problems to the caller identifier service;
After dial some numbers the handset lost the link to the base
: disable the call barring;
On switchboard (PABX) I can't get the external line
: change the dial mode on Pulse.
14
ENG
Technical data
- Technology: DECT Standard (Digital European Cordless Telephone) with GAP
(Generic Access Profile) profile
- RF Channels: 10 Channels
- Frequency range: 1.881 Ghz ~ 1.897 GHz
- Channel Bandwidth: 1.728 MHz
- Speech encoding: ADPCM / 32 Kbps
- Modulation type: GFSK, Output power: 250mW max
- Battery life: stand-by: about 5 days; talk: about 10 hours
- Communication range: about 300 mt in open field; about 50 mt in closed field
- Power supply for handset: Ni-MH Batteries (AAAx2, 2.4V, 550 mAh)
- Power supply for base set:AC/AC adaptor AC9V 300mA
- Recharging time: 12 hours
- Dialing method: DTMF/Pulse
- Max handset to the base: 4 (3 + 1 in endowment)
- Max base to the handset: 4
New message on network answering machine (PhoneMail)
If there are new messages on PhoneMail TWIST208 will display icon.
