Call Barring
It is possible to lock until up to 5 area code (max. 4 digits each one).
For each area code you lock, it is also possible to decide which handset must be locked.
1) Press MENU key, by keys select "
BASE SET
" then press OK key,
2)Type the PIN code (0000 default) then press OK key, wait a moment;
3) By keys select "
barring
"
, then press OK key;
4) By keys select the location of the area code to block (between 1 and 5), then press
OK key;
5) Enter the new area code to be locked (press
C
key to delete the previous digits);
6) Press OK key to confirm;
7) Type the numbers of the handset to be blocked, when a number appear it means that
this handset is blocked, press again the number of the handset to unlock, press
OK key to confirm;
Press more times C key to come back to the stand-by mode.
The call barring is now enabled and is not possible to make a call by the handset
blocked toward the area code you set.
To delete:
Repeat theprocedure but at point 5 delete all the previous area code then press OK key.
PABX code
If you connect the unit to the PABX (Switchboard), to obtain external line normally you
must dial 0 or 9 as for first digit. If you store this number, you will obtain an automatic
pause of 3 seconds around every times 0 or 9 is entered at first digit to make easy the
connection between switchboard and external line.
1) Press MENU key, by keys select "
BASE SET
" then press OK key,
2) Type the PIN code (0000 default) then press OK key, wait a moment;
3) By keys select "
PABX
" then press OK to confirm;
4) By keys select the position of the code (between 1 and 2), then press OK key;
5) Type the exit code code then press OK;
Press more times C key to come back on stand-by mode.
To disable
:
Repeat the prodecure but at 4 point delete by C key the exit code until the position
is empty then press OK key.
Dial mode setting
On default the dial mode is setting on DTMF, that is the more recent and faster dial
mode and allows to use the telephone service that need the tone to working, but if
you have an older telephone line or a switchboard (PABX) that work only with pulse
you have to change the dial mode on Pulse.
To set:
1) Press MENU key, by keys select "
BASE SET
" then press OK key,
2) Type the PIN code (0000 default) then press OK key, wait a moment;
3) By keys select "
DIAL MODE
" then press OK to confirm;
4) By keys select between
TONE
(DTMF) and
PULSE
then press OK key.
Press C key to come back on stand by.
11
ENG
