BELGACOM B-BOX, Instructions For Use Manual

Page: 30 / 91

File Allows you to enable or disable file server functionality. Server
Tools Contains options to back up and restore the current configuration, restore all
configuration settings to the factory defaults, update system firmware, or reset
the system.
Status Provides WAN connection type and status, firmware and hardware version
numbers, system IP settings, as well as DHCP, NAT, and firewall information.
Displays the number of attached clients, the firmware versions, the physical MAC
address for each media interface, and the hardware version and serial number.
Shows the security and DHCP client log.
Making Configuration Changes
Configurable parameters have a dialog box or a drop-down list. Once a configuration
change has been made on a page, click the “SAVE SETTINGS” or “NEXT” button at the
bottom of the page to make the new settings active.
Note: To ensure proper screen refresh after a command entry, check that Internet Explorer
5.0 is configured as follows: Under the menu Tools/Internet
Options/General/Temporary Internet Files/Settings, the setting for “Check for newer
versions of stored pages” should be “Every visit to the page.”
System Settings
Time Settings
Set the time zone and time server for the Belgacom b-box. This information is used for log entries
and client access control.
30