BELGACOM B-BOX, Instructions For Use Manual

Page: 14 / 91

Obtain IP Settings From Your Belgacom b-box
Now that you have configured your computer to connect to your Belgacom b-box, it needs
to obtain new network settings. By releasing old DHCP IP settings and renewing them with
settings from your Belgacom b-box, you can verify that you have configured your computer
correctly.
1. On the Windows desktop, click Start/Programs/ Accessories/Command Prompt.
2.
In the Command Prompt window, type “IPCONFIG /RELEASE” and press the ENTER
key.
1. Type “IPCONFIG /RENEW” and press the ENTER key. Verify that your IP Address is
now 192.168.1.xxx , your Subnet Mask is 255.255.255.0 and your Default Gateway is
192.168.1.254 . These values confirm that your Belgacom b-box is functioning.
2. Type “EXIT” and press the ENTER key to close the Command Prompt window.
14