background image

3

Do not leave the appliance unattended whilst connected to the 

mains power supply. 

Do not remove the appliance from the mains power supply by 

pulling the cord; switch it off and remove the plug by hand. 

Do not pull or carry the appliance by its power supply cord. 

Do not direct steam at people or animals. 

Do not direct steam towards equipment containing 

electrical components. 

Do not use the appliance in an enclosed space filled with vapour 

given off by oil-based paint thinners, some mothproofing 

substances, flammable dust or other explosive or toxic vapours. 

Do not use the appliance for anything other than its intended use. 

Do not use any accessories other than those supplied. 

Do not use this appliance outdoors. 

Do not touch any sections of the appliance that may become hot or 

the heating components of the appliance, as this could cause injury. 

Do not use the appliance after a malfunction or if it has been dropped, 

damaged or if there are visible signs of damage or if it is leaking. 

Always unplug the appliance after use and before any cleaning or 

user maintenance. 

Always ensure that the appliance has cooled fully after use before 

performing any cleaning or maintenance or storing away. 

Always use the appliance on a stable, heat-resistant surface, at a 

height that is comfortable for the user. 

Use of an extension cord with the appliance is not recommended. 

This appliance should not be operated by means of an external 

timer or separate remote control system. 

This appliance is intended for domestic use only. It should not be 

used for commercial purposes. 

  

Caution: The appliance emits very hot steam; always 

exercise extreme caution during use. 

Hot surface – do not touch the hot section or heating 

components of the appliance. 

Summary of Contents for BEL0747

















Reviews: