25
Kaleido-X
Quick Start Guide
Standard wiring between multiviewer and devices wired to SMPTE “slave” specification (e.g. most
routers, Ross Synergy switchers, Nevion ETH-CON)
Standard wiring between multiviewer and devices wired to SMPTE “master” specification (e.g. Philips
Jupiter router control system, Miranda Presmaster PCS)
For more information about the RS-422 specifications, see the “RS-422” section in the
Specifications
chapter of the Kaleido-X (4RU) Hardware Description & Installation Manual.
For more information about the RS-422 serial connections, see the “Serial Connections”
section in the
Routers
chapter of the Kaleido-X User’s Manual.
Note:
The two RS-422 ports on the multiviewer side have no ground pin.
Using the appropriate DE-9S-to-RJ-45 adapter, an external device should be
able to communicate with a multiviewer despite the lack of a ground.
Pinout of each RS-422
port’s RJ-45 connector
on the multiviewer
Pinout of
straight
adapter
(Miranda part no. 1737-3000-102)
RJ-45
DE-9 male DE-9 female
Pinout of RS-422
connector on SMPTE
slave
device
Pinout of each RS-422
port’s RJ-45 connector
on the multiviewer
RJ-45
DE-9 male DE-9 female
Pinout of
crossover
adapter
(Miranda part no. 1792-3700-100)
Pinout of RS-422
connector on SMPTE
master
device
Summary of Contents for Miranda Kaleido-X (4RU)
Page 1: ...Quick Start Guide M809 9905 110 12 January 2014...
Page 30: ......
